Product Care
Finishing Guidelines for Staining, Carpeting, and Painting
Please keep in mind that timber stairs are typically finished by external trades after installation. Aspire Stairs cannot control site conditions, including dust and grit. It is crucial to minimize dust and grit levels on or around the stairs before painting or staining.
​
Moisture: Excessive moisture can lead to movement and potential damage to stair components over time. It is highly recommended to install timber stairs only when there is a permanent cover to protect them from moisture.
​
Cleaning: When cleaning the timber elements of your stair, use a damp cloth or mop to remove dust or dirt. It is preferable to use water-based cleaning products as they are less likely to damage surfaces and finishes. For steel or glass elements, you can use window cleaner such as Windex to achieve a clean and clear finish.
​
Heat: Prolonged exposure to heat can cause shrinkage and movement of timber stairs. Avoid positioning stairs close to heating vents, heaters, or hot electrical appliances.
​
Wear and Scratch Damage: Timber stairs are susceptible to damage from heavy foot traffic, especially from high-heel shoes or dragging heavy objects. Take care to avoid these types of damage, considering the hardness rating of the timber used.
​
​
Stainless Steel Care
​
Indoor Stainless Steel: Regular cleaning of indoor stainless steel can be done using an ordinary household cleaner with low chloride content, followed by thorough rinsing with water to avoid streaks.
Fingerprints, Oils, and Grease Marks: Most light marks, fingerprints, oils, and grease can be removed with mild detergent.
​
External Applications: Although rainfall can wash away dirt and deposits from stainless steel, it is generally recommended to supplement this process by washing stainless steel surfaces at least once or twice a year, particularly in sheltered areas.
​
Rust Marks and Tea Staining: To prevent tea staining from affecting the underlying surface, it is important to take early action. Rust and stains can be removed using a product like Stainless Steel Rust & Stain Remover without affecting the finish of the material.
​
Grease, Oily Film, and Organic Contamination: Alkaline formulations, hot water with detergents, or hydrocarbon solvents can be used to remove oils and grease. After cleaning, rinse the surface with clean water and dry it. For directional polished finishes, wiping along the polish direction with hot, clean water and a soft absorbent cloth can reduce smears.
​
Stainless Steel Cleaning Intervals: The recommended cleaning intervals depend on the proximity to coastal environments. In general, stainless steel should be cleaned every 12 months if located more than 10km from the beach. Cleaning frequency increases as the proximity to the beach decreases.